| Series | Rated power, kW | Options | ||
|---|---|---|---|---|
|
VENTS AOW | 25; 30; 45 | A - control block |
Air heating (cooling) unit VENTS AOW
Air unit with the water heat exchanger with heating capacity up to 45 kW and the air capacity up to 3850 m3/h. Designed for cost-saving and efficient air heating and cooling in various premises.
Products in this series (6)
Application
Designed for air heating or cooling by water heat medium with subsequent uniform air distribution by the fan and louvre shutters. The units provide quick heating or cooling of large premises due to high efficient air heater and powerful fan and are suitable for local air heating or cooling of working areas in hangars or large industrial premises. Further application areas include workshops, garages, car showrooms, stock houses, trade facilities, super- and hypermarkets, shops, sport halls, conference halls, poultry and cattle farms, greenhouses and other similar premises. The unit design enables quick and easy mounting and reduces total investment costs for heating (cooling) system.
Design
AOW unit consists of the axial fan and aluminium-copper ribbed water heating coils located in steel casing with polymeric coating. The water coils are equipped with internally threaded pipes on the casig side for connection and supply of heat medium.
Motor
AC motors with external rotor and built-in thermal overheating protection with automatic restart.
Control and regulation
Both smooth or step speed control with a thyristor or autotransformer controller. Motor speed decrease allows reducing flow and value of heating or cooling energy transfer.
The model AOW…A is equipped with an automation unit for operation mode control of the AOW unit. The casing is made of polymer coated steel and has IP44 ingress protection rating. The automation unit has three operation modes, i.e. three modes for speed control of the unit AOW...A.
The unit incorporates a switch with a light indicator, cable entry seals for cable connection, safety fuse for short circuit protection. The automation unit is designed for joint operation either with TST-3 series digital thermostats with a sensor display (the thermostat TSTD-3 is equipped with a remote control panel DU) or with RTS-1-400 series thermostats with LCD display (RTSD-1-400 is equipped with a remote control panel DU). The digital thermostats are available upon separate order. Install the thermostat in the same room where the AOW unit is installed. It is used to measure the indoor temperature and control the unit operation. For correct functioning of the unit install the thermostat in places that are not subjected to temperature fluctuations, i.e. close to windows, doors, heating batteries. One thermostat can be used for control of several air heating (cooling) units located in the same room.
Mounting
The unit is suitable for vertical installation on walls or columns or horizontal installation on ceiling (beams).
Air heating (cooling) advantages:
- quick attaining of the set temperature in the premises
- low system response time allows applying varying temperature conditions
- high thermal capacity
- lower investment costs for air heating (cooling) system as compared to similar water heating (cooling) systems

VENTS AOW heating unit gym heating example.

VENTS AOW unit greenhouse heating example.
.gif)
VENTS AOW unit garage cooling example.

VENTS AOW unit stock house heating example.
![]()
Phohe
Customer service.
+380 44 406 36 25
![]()
Online form
Send a message center customer support.
Brochure "VENTS AOW"
( PDF 702,42Kb )
Download high quality image "VENTS AOW (front view)"
( PSD 52,49Mb )
More downloads
Download high quality image "VENTS AOW (back view)"
( PSD 56,84Mb )
Download high quality image "VENTS AOW A"
( PSD 18,03Mb )






