Vote

How often do you use equipment selection program?

Novelties

  • Inline centrifugal fan VENTS VK EC seriesInline centrifugal fan VENTS VK EC series new series

    Inline centrifugal fans in plastic casing with the air capacity up to 1500 m3/h. Designed for supply and exhaust ventilation systems.

  • Switch P2-10Switch P2-10 new series

    Turning fan on/off and speed switching for multispeed fans.

  • DG1 seriesDG1 series new series

    Access doors for plasterboard applications.

Keep up with us

RSS Subscribe to blog
Vents.TV

Blog messages

Go to blog

Domestic fan control unit

Domestic fan control unit

Products in this series (1)

  • BU-1-60

    BU-1-60

Application
  • Automation and control of residential fan operation. It includes automatic controls as timer, humidity sensor, photosensor and motion sensor. All these options can be used in any combination.
Design
  • The control unit casing is made of high-quality plastic.
  • The front panel is equipped with light indicators that display the current operating mode.
  • Automatic operation with selected mode is possible. The switches are used to activate required operation modes depending on a specific application. The control units are available in several modifications:
  • Turn-off delay timer keeps the fan running for a set time period after turning the built-in or external switch off that provides extra ventilation in the premise. The control unit switches the fan off from 5 sec to 30 minutes.
  • Cyclic timer operation: the cyclic operation mode allows switching the fan on and off with set time intervals. Operation or standstill duration is adjusted from 5 sec to 30 min. The fan switches on and operates within pre-set time period followed by a pause according to timer settings. After that the cycle is renewed.
  • Humidity sensor switches the fan on as the humidity level in the premise increases above the set threshold. As it drops back the control unit switches the fan off. Humidity threshold is user-adjustable.
  • Built-in photosensor is sensitive to illumination in the room and switches the fan automatically on.
  • «Dark mode»: The control unit switches the fan on after the light is off. The operation duration is adjustable from 5 sec to 30 min and the photosensor threshold is set by the regulator.
  • «Light mode»: The control unit switches the fan on after the light is on. As light is off the fan continues operating and turns off as the turn-off delay timer requires from 5 sec to 30 min. If the light is on more than 60 minutes the fan switches off. The photosensor threshold is set by the control unit.
  • The motion sensor responds to human motion in the sensitivity area and switches the fan automatically on. When motion is not registered the control unit switches the fan off as the turn-off delay timer requires from 5 sec to 30 min. Use of the motion sensor makes the fan control easy and is especially suitable for periodically visited premises. The sensitivity area is 4 m max. and the detection angle up to 100°.
Mounting
  • The control unit is designed for indoor installation, both close to the fan and remote. The installation place is selected with respect to the furniture location and walking routes.

E-mail

Please, feel free to contact us.

support@vents.ua

Phohe

Customer service.

+380 44 406 36 25

Online form

Send a message center customer support.

By using this form you confirm that you have read and agree with the site condition and terms.
Send